[Product Overview] peeling mixed-type aerator is a new aeration with oxygen utilization, pool uniform velocity, flow pattern, and do not clog, convenient installation. [Product Specifications] structure and gas delivery from the intake manifold to the aerator after swirling circle uniformly mixed with the mixture, by the dynamic core were negative spin to form a gas-liquid cyclone zone strengthened, and is continuously mixed spin. Bubble mixture into the prepared hole formed after the second cut in a row along the diversion ring with a mezzanine teeth tooth cap cover three times cut down, crash, after rising around the mixture evenly spread and promote a rise in the gas-liquid mixing violent doped, accelerate update the gas-liquid interface. Gas bubbles after three cut into small, invisible gas-liquid contact area increases, more favorable dry oxygen transfer, thereby increasing oxygen utilization. [Range] 1 to blast gas source for industrial wastewater treatment aeration tank. 2, activated sludge and contact oxidation. 3, the original old aerator technical renovation. [Features and Benefits] 1, exhaust, diversion uses a large aperture, by a variety of effects on the structure of the diffusion flow segmentation, is a modern and advanced diffusion aeration. 2, the device has not blocked, air resistance loss characteristics, can maintain long-term stable operation of small bubbles uniformly dense and porous aeration efficiency compared to the gradual deterioration of worries does not exist. 3, the material easy to aging, a comprehensive safeguards without cleaning, replacement and repair. 4, the resistance loss, ≤30Pa